Sale! SKY-HD01 AIO HD 1080P FPV Wireless Transmitter DV Camera

SKY-HD01 AIO HD 1080P FPV Wireless Transmitter DV Camera

SKU:HS1187

US$ 99.00

-

+

Description:

  • Full HD 1080p 30fps
    Built-in 4 Bands 32CH 5.8Ghz 400mw transmitter
    LENS Rotation range: ±45 degrees
    FOV angel: 150 degrees (Diagonal)
    Support PWM remote control
    Support OSD


Operation:

Power Key/Led

  1. Long press Power button for 3 seconds to turn on the PWM remote Control and blue led flashes. Short press again to turn on the camera and in camera review mode.(Blue Led off after turning on and Red constant light)
  2. Short press once to enter system menu under Review mode
  3. It’s ESC button in menu mode
  4. Long press 3 seconds to turn off the device.


Photo Key

  1. Short press once to capture a photo in review mode
  2. Short press once to capture a photo in recording mode


Record Key

  1. Short press once to start recording in review mode and press to stop recording
  2. Long press 3 second in review mode to enter playback mode
  3. It’s OK button in menu mode


UP key

  1. Short press once to setup the Bands
  2. It’s UP button in menu mode


Down Key

  1. Short press once to setup the channels
  2. It’s Down button in menu mode


Record Mode

  1. Red LED flashes while recording and REC icon in red
  2. Video files will be auto saved (reach setup video length)and create a new file to continue recording.(recording time will be displayed on the screen until stop recording)
  3. It’s OK to capture photo while recording


Playback Mode

  1. Features of the buttons:

: Play/Pause
: Stop/Menu/Esc

: UP

: Down


Remote Bands/Channels Setup

  1. Connect 3P remote control cable to one of PWM Channel of the receiver and other end to the S1 port on the camera
  2. To assign a Channel to Bands/Channels Setup and assign another 3 switch, C-H for Bands, C-L for channels


Remote camera control ( fulfill with suited LCD display products)

  1. Connect 3P remote control cable to one of PWM channels of the receiver and the other end to the S2 port of the camera
  2. To assign a channel to camera remote control port S2
  3. Connect the LCD monitor remote control output port to the PWM input of the remote control. Then you can operate the camera via the LCD monitor


External OSD Device

    • Press both UP/DOWN button at the same time in review mode to switch the camera to OSD transmitter mode. Then the video output to the external OSD and then back to the camera
    • Press the two buttons again back to normal video transmitter mode


Precautions:

Please connect the Micro 5Pin USB cable to the DV and the other end to the 5V power source( Power adapter, PC or power-bank
It’ll take about 90mins to recharge. Charge Led is in red while charging and in green after fully charged.
Please make sure power source is no less than 5V/1.2A while recharging and recording at the same time.
The PWM remote control feature fulfill with a 3 Switch of the remote controller.
The PWM remote control feature fulfill with suited LCD display products.


Specification:

Parameter
Video Size 1080p30(default)/720p60/720p3
Video quality High(default)/Medium/Low
Video Length 30Min.(default)/20Min./10Min./Min.
Auto REC On(default)/Off
Time Stamp Off(default)/Date Only/Date&Time
Audio Record On(default)/Off
EV 0
Orientation Normal(default)/180
OSD On(default)/Off
Setup
Language English(default)/ Simplified Chinese/ TraditionalChinese/ French/ Germany/ Italian/ Spanish/ Portuguese/ Japanese
Date Input 2015/8/10
Time Input 10:35:00
Date Format YY/MM/DD MM/DD/YY DD/MM/YY
Format
Auto shutdown Off(Default)/5Min/10Min/15Min/20Min/30Min
Light Freq. 60Hz(default)/50Hz
TV Output NTSC(Default)/PAL
USB DC IN(Default)/Disk Drive
Sys. Reset
FW Upgrade
FW Version 2015.03.10.01
Camera
FOV 150 degrees (Diagonal)
LENS Rotation range ±45 degrees
Resolution 1920x1080p30,1280x720p60,1280x720p30
Micro SD Support to 32GB
Video Compression h.264
Picture JPEG
Record quality High,Mid,Low
Microphone Digital
Transmitter ISM 5.8GHz 32 Channel
Wireless Transmitter
RF Output Power 24dBm±1dBm
RF Output Impedance 50ohm,SMA port
USB
Micro USB 5Pin, High speed USB 2.0
DC IN DC5/1.2A
Power Supply Built-in Li-Ion battery 3.7V/ 500mAh
Dimensions 65(L)X37(W)X20(H)mm (Not include prominent part)
Weight g
Operating Temperature 0℃~50℃




    Related Products: