FOXEER ARROW Newly Back with several improvements
1. User name, timer, and voltage be controlled separately, show or not show, position moved function.
2. Fix OSD flashing issue.
3. Better power module upgrade to 5-35v available.
4. Upgrade to 7pin to monitor the battery consumption.
5. Voltage data adjustment by OSD if the voltage is not according with real power.
6. Cable of Connector (2pin) be short and match a extend cable (could be removed) easy for OSD setup.
FOXEER ARROW is the advanced version of FOXEER XAT600M (HS1177), which featured by excellent wide dynamic range function and brilliant image performance. It can not only supports DC5-35V wide voltage range, but also has inbuilt OSD and MIC. The camera case is made of Germany PC, which can better survive from vibrations and crashes than PC / ABS blend thermoplastic. Inbuilt FPV exclusive designed OSD, can display name, power, flying time. Inbuilt MIC, makes the flying experience more immersive. Whole new patented bracket, more secure, matches to two camera cases. Plastic rings set is also included, there can be a variety of assembly methods.
Model | Foxeer Arrow |
CCD | 1/3" Sony SUPER HAD II CCD |
Pixel | PAL: 976(H) x 494(V); NTSC: 768(H)×494(V) |
TV System | PAL/NTSC (according to country) |
Resolution | 650TVL(b/w), 600tvl(color) |
Synchronization | internal synchronize |
Shutter Speed (CCD IRIS) | PAL: 1/50~1/100000 sec; NTSC: 1/60~1/100000 sec |
Noise | > 60 (AGC OFF) |
Video Out | 75ohm, synchronize |
Min. Illumination | 0.01Lux |
Auto Gain | Off/ Low/ Mid/ High |
Back Light Compensation (BLC) | Off/ Back light compensation/ Strong light suppression |
Private shading (PRIVACY) | 1~8 private shading area |
Motion Detection (MD) | On/ Off (Multi level sensitivity settable) |
Auto White Balance | Manual/ Auto / Auto track |
Mirror | Horizontal Mirror optional |
Negative | Positive/ Negative optional |
Color to B&W | Auto |
DNR | 2DNR |
WDR | D-WDR |
Day / Night Shift | Auto/ Color/ B&W |
Menu (OSD) | English menu |
White Dot Repair | Support |
Image Adjustment | Support |
Camera Title | Support |
Power Requirement | DC5V~35V |
Working Temperature | -10C~50C |
Working Humidity | 20~80% |
Storage Temperature | -40C~60C |
Storage Humidity | 20~95% |
Dimensions(mm) | 26X26(W*L) |
Power Consumption | 70mA |
Package Included | 1 x Foxeer Arrow camera |
1 x Lens base | |
1 x 7pin servo cable | |
1 x OSD | |
1 x Manual | |
Screws |
Just a camera.nHalf of them didnt come with the two hole locking style case.nALL of them come with completely NO m2 or m3 nuts to mount to a frame!nThe osd is a swapping timer and single voltage read every ten seconds. Not unusable, but enough of a deterrnet none of them are sellingnAll in all they're good cheap cams worth nowhere near what they could have been with the proper functioning osd.nThe 1.5mm lip on the back of the case makes it a pita to mount on a lot of frames.
The new Arrow will fix flashing OSD issue, and will add extra 1pin to connect with PDB input side to detect battery voltage.
I think this product is like a good simple.nThe second time of a purchase.
It is overall just a HS1177 with a better case... If you plan to buy it because of the OSD like I did, dont do it! The OSD is switching every 5 seconds between voltage and time and thats why the voltage and time are updated only every 10 seconds!! This is a no go and should have been mentioned in the product description..
Great cam! OSD stays on and after adjustment, reads accurate. Will be buying these for all my models!